©Copyright 2019 SIKO POLYMERS (SUZHOU) CO., LTD All rights reserved.Site Map Powered by iwonder.cn
As a high performance polymer solutions provider and partner, SIKO provides a wide range of polymer material for your products application, which are equivalent to your current brand, such as DUPONT,BASF, DSM, SABIC, COVESTRO, EMS,TORAY, POLYPLASTICS, CELANESE and so on, to view whole list of comparison between SIKO and these brands, please check as following.
Material | Specification | SIKO Grade | Equivalent to Typical Brand & Grade |
PA6 | PA6 +30%GF | SP80G30 | DSM K224-G6 |
PA6 +30%GF, High impact modified | SP80G30ST | DSM K224-PG6 | |
PA6 +30%GF, Heat stabilized | SP80G30HSL | DSM K224-HG6 | |
PA6 +20%GF, FR V0 Halogen free | SP80G20F-GN | DSM K222-KGV4 | |
PA6 +25% Mineral filler, FR V0 Halogen free | SP80M25-GN | DSM K222-KMV5 | |
PA66 | PA66+33%GF | SP90G30 | DUPONT 70G33L, BASF A3EG6 |
PA66+33%GF, Heat stabilized | SP90G30HSL | DUPONT 70G33HS1L, BASF A3WG6 | |
PA66+30%GF, Heat stabilized, hydrolysis | SP90G30HSLR | DUPONT 70G30HSLR | |
PA66, high impact modified | SP90-ST | DUPONT ST801 | |
PA66+25%GF, FR V0 | SP90G25F | DUPONT FR50, BASF A3X2G5 | |
PA66 Unfilled, FR V0 | SP90F | DUPONT FR15, TORAY CM3004V0 | |
PPS | PPS+40%GF | SPS90G40 | Phillips R-4, Polyplastics 1140A6, Toray A504X90 |
PPS+70% GF and Mineral filler | SPS90GM70 | Phillips R-7, Polyplastics 6165A6, Toray A410MX07 | |
PPO | PPO Unfilled FR V0 | SPE40F | SABIC NORYL PX9406 |
PPO+10%GF, HB | SPE40G10 | SABIC NORYL GFN1 | |
PPO+20%GF, HB | SPE40G20 | SABIC NORYL GFN2 | |
PPO+30%GF, HB | SPE40G20 | SABIC NORYL GFN3 | |
PPO+20%GF, FR V1 | SPE40G20F | SABIC NORYL SE1GFN2 | |
PPO+30%GF, FR V1 | SPE40G30F | SABIC NORYL SE1GFN3 | |
PPO+PA66 Alloy+30%GF | SPE4090G30 | SABIC NORYL GTX830 | |
PPA | PPA+33%GF, Heat stabilized, Hydrolysis, HB | SPA90G33-HSLR | SOLVAY AS-4133HS,DUPONT HTN 51G35HSLR |
PPA+50%GF, Heat stabilized, HB | SPA90G50-HSL | EMS GV-5H, DUPONT HTN 51G50HSL | |
PPA+30%GF, FR V0 | SPA90G30F | SOLVAT AFA-6133V0Z, DUNPONT HTN FR52G30NH | |
PA46 | PA46+30%GF, Lubricated, Heat stabilized | SP46A99G30-HSL | DSM Stanyl TW241F6 |
PA46+30%GF, FR V0, Heat stabilized | SP46A99G30F-HSL | DSM Stanyl TE250F6 | |
PA46+PTFE+30%GF, Lubricated, Heat stabilized, Wear resistant, Anti-friction | SP46A99G30TE | DSM Stanyl TW271F6 | |
PEI | PEI unfilled, FR V0 | SP701E | SABIC ULTEM 1000 |
PEI+20%GF, FR V0 | SP701EG20 | SABIC ULTEM 2300 | |
PEEK | PEEK Unfilled | SP990K | VICTREX 150G/450G |
PEEK Monofilament extrusion grade | SP9951KLG | VICTREX | |
PEEK+30% GF/CF(Carbon fiber) | SP990KC30 | SABIC LVP LC006 | |
PBT | PBT+30%GF, HB | SP20G30 | BASF B4300G6 |
PBT+30%GF, FR V0 | SP20G30F | BASF B4406G6 | |
PET | PET+30%GF, FR V0 | SP30G30F | DUPONT Rynite FR530 |
PC | PC, Unfilled FR V0 | SP10F | SABIC LEXAN 945 |
PC+20%GF, FR V0 | SP10F-G20 | SABIC LEXAN 3412R | |
PC/ABS Alloy | SP150 | COVESTRO Bayblend T45/T65/T85, SABIC C1200HF | |
PC/ABS FR V0 | SP150F | SABIC CYCOLOY C2950 | |
PC/ASA Alloy | SPAS1603 | SABIC GELOY XP4034 | |
PC/PBT Alloy | SP1020 | SABIC XENOY 1731 | |
PC/PET Alloy | SP1030 | COVESTRO DP7645 | |
ABS | ABS FR V0 | SP50F | CHIMEI 765A |